Complete
Skateboards - Page 2
"OG"
HARDWARE:
Trucks: Tracker 129mm Darts
Bearings: Gravity ABEC5
Risers: Gravity Angled
Wheels: Gravity 66mm
Wood: 7ply Hardrock Maple
SPECS:
Length: 30.00 inches
Width: 8.5 inches
Nose: 3.5 inches
Tail: 5.5 inches
Wheelbase:16.25 inches
|
BUY
NOW - $130.00 |
view
cart / checkout |
Just
In! Madrid 1976 Retro Rider Complete Skateboard!
We just received our shipment of these killer 1976 Madrid completes. The deck measures 27.5 inches long x 7.25 wide with a 14 inch wheelbase.The trucks are set up with re-issued Cadillac Wheels that are 56mm with a 92 duro hardness.
Super fun complete with a cool retro 70's graphic.
We just received our shipment of these killer 1976 Madrid completes. The deck measures 27.5 inches long x 7.25 wide with a 14 inch wheelbase.The trucks are set up with re-issued Cadillac Wheels that are 56mm with a 92 duro hardness.
Super fun complete with a cool retro 70's graphic.
| BUY
NOW - $75.95 | view
cart / checkout |
. 
WOW! Another Tailtap Exclusive!
Makaha Clay Wheel Classic!
• 7.25 x 29.5
• Hand made in Southern California
This is no joke, we have a handful of the these beautiful, clay wheel classics available for the first time in more than 30 years. These handcrafted completes are a steal and not available anywhere else.
Larry Stevenson the founder of Makaha, first began making handmade boards in 1962 and by 1963 was producing 2000 a day out of his Santa Monica shop.
Makaha has remade these solid hardwood decks to exact standards even down to the decal, then mounted them with correct era, jam nut style trucks. To top it all off Makaha opened the vaults and pulled out original, loose ball bearing, clay "Chicago" Makaha wheels to complete this truly remarkable classic.
Be on the lookout because in the coming months we will be offering more classic Makaha skateboards and even a few accessories. There is also a documentary in the works and tailtap.com will be your direct source.
| BUY
NOW - $240.00
| view
cart / checkout
|
New
Makaha 29 inch Originator Complete
Another tailtap.com exclusive, if you ever wanted to ride a fun solid style board now is your chance!
Our Makaha 29 x 8 inch is a real classic, shaped from a solid peice of hand selected hardwood with a wedge style kicktail. Each are hand assembled in our Southern California factory with the following high quality, made in the USA components - the types of products we're proud to offer our loyal customers. These classic style decks were produced in limited numbers, so grab one while you can.
Deck: Solid hardwood with wedge tail.
Grip Tape: Custom die cut strip tape with underlay.
Trucks: Bennett 4.3 Vector silver series Classics.
Wheels: Bennett Alligator 62mm (you choose color and hardness!)
Bearings: Sealed Precision.
Riser Pads: .25 inch.
Hardware: Case hardend philips head.
Please specify wheel color / hardness at checkout.
Another tailtap.com exclusive, if you ever wanted to ride a fun solid style board now is your chance!
Our Makaha 29 x 8 inch is a real classic, shaped from a solid peice of hand selected hardwood with a wedge style kicktail. Each are hand assembled in our Southern California factory with the following high quality, made in the USA components - the types of products we're proud to offer our loyal customers. These classic style decks were produced in limited numbers, so grab one while you can.
Deck: Solid hardwood with wedge tail.
Grip Tape: Custom die cut strip tape with underlay.
Trucks: Bennett 4.3 Vector silver series Classics.
Wheels: Bennett Alligator 62mm (you choose color and hardness!)
Bearings: Sealed Precision.
Riser Pads: .25 inch.
Hardware: Case hardend philips head.
Please specify wheel color / hardness at checkout.
| BUY
NOW - $175.00 | view
cart / checkout |
Temporarily
Sold Out
Powell Re-issue Complete - General Issue
• Size: 28.125" x 7.25"
Another complete offering that you can only get from Tailtap.com. Our Powell General Issues are assembled with the newest version of the Bennett Vector 4.3 polished truks that feature the new high rebound urethane bushings. Wheels are competition grade, white 3DM Cambria's that are 62 mm tall and 84 durometer - these wheels win slalom races across the USA every year! We are using Powell bearings and the grip tape has been custom lazer cut just for us and really finishes off this complete with a pro appearance. Our General Issues are a blast to rip around town on with Grippy Fast Wheels, Super Turny Truks, Quality USA Wood and lightweight - what more could you ask for? There are not a lot of these decks available and when they are gone I doubt that Powell will produce them again.
Powell Re-issue Complete - General Issue
• Size: 28.125" x 7.25"
Another complete offering that you can only get from Tailtap.com. Our Powell General Issues are assembled with the newest version of the Bennett Vector 4.3 polished truks that feature the new high rebound urethane bushings. Wheels are competition grade, white 3DM Cambria's that are 62 mm tall and 84 durometer - these wheels win slalom races across the USA every year! We are using Powell bearings and the grip tape has been custom lazer cut just for us and really finishes off this complete with a pro appearance. Our General Issues are a blast to rip around town on with Grippy Fast Wheels, Super Turny Truks, Quality USA Wood and lightweight - what more could you ask for? There are not a lot of these decks available and when they are gone I doubt that Powell will produce them again.
| SOLD
OUT - $149.00 |
view
cart / checkout |
Skate
Designs - Skitch Hitchcock Complete!
Dale Smith from Skate Designs keeps the functional designs coming! This new Skitch Hitchcock measure 29" x 8.5" with a 14 inch wheelbase and features custom cut wooster glitter grip on top. For trucks we have chosen the ultra turning Bennett 5.0 Vector model along with Bennetts new super grippy and long lasting 62mm Alligator wheels. The bearings, of course are high quailty abec 5 sealed precision. The Hitchcock is all bolted together with hardend philips style hardware and .5 inch riser pads to avoid wheel bite. This complete skateboard arrives fully assembled and ready to rip! Another high quailty, made in the USA fun and functional complete. Please choose deck/wheel color at checkout.
Dale Smith from Skate Designs keeps the functional designs coming! This new Skitch Hitchcock measure 29" x 8.5" with a 14 inch wheelbase and features custom cut wooster glitter grip on top. For trucks we have chosen the ultra turning Bennett 5.0 Vector model along with Bennetts new super grippy and long lasting 62mm Alligator wheels. The bearings, of course are high quailty abec 5 sealed precision. The Hitchcock is all bolted together with hardend philips style hardware and .5 inch riser pads to avoid wheel bite. This complete skateboard arrives fully assembled and ready to rip! Another high quailty, made in the USA fun and functional complete. Please choose deck/wheel color at checkout.
| BUY
NOW - $159.00
| view
cart / checkout |
Skate
Design Skateboards - Black Crown Complete Skateboard
Construction: 7 ply maple, pressed in San Diego,
California USA.
Length: 29.5 inches.
Width: 8.5 inches.
Wheelbase: 15.5 inches.
Tail: 6 inches.
Nose: 4 inches.
Concave: flat single kick.
Graphic: One color crown logo with pinstripe rails
- all class.
Other: Dale Smith, a veteran of skateboarding, has
been designing first class skate products for many years. He's designed Smith
Scabs, Gladiator pads and, more recently, classic style cruisers built with
the best trucks and wheels.
These Black Crown completes feature:
• USA made 7 ply maple deck - Hackett / Smith shape
• Tracker polished FulTrack Trucks
• 3dm 78duro Cambria wheels - the ones used in the DogTown film.
• Die Cut grip tape
• Abec 5 bearings
• Tracker .25 inch riser pads
• Arrives to you assembled and ready to rip
Please specify first and second color choice at check out.
|
BUY
NOW - $149.00
| view
cart / checkout |
NEW
Fun, Snappy, Boardwalk Bombers!
Skate Designs "Stinger" Complete
On our morning commute to the Tailtap offices we no doubt see at least 3 guys cruising on these small Stingers up and down the coast each morning. Why? The Stinger is a super functional set up, that's why! If you are looking for a cruiser that does not weigh 30 pounds or take up two blocks to turn, look no further. Dale Smith makes these "Stingers" and they are fun boards to ride. They come set up with Tracker 129 mm trucks, .25 inch riser pads, abec 5 bearings and they hug the pavement with soft grippy 78 durometer wheels. The deck is shaped like a classic "stinger" style surfboard and is available in 27 inch and 30 inch lengths. They arrive to you gripped and ready to rip. Made in the USA. Colors may vary.
Skate Designs "Stinger" Complete
On our morning commute to the Tailtap offices we no doubt see at least 3 guys cruising on these small Stingers up and down the coast each morning. Why? The Stinger is a super functional set up, that's why! If you are looking for a cruiser that does not weigh 30 pounds or take up two blocks to turn, look no further. Dale Smith makes these "Stingers" and they are fun boards to ride. They come set up with Tracker 129 mm trucks, .25 inch riser pads, abec 5 bearings and they hug the pavement with soft grippy 78 durometer wheels. The deck is shaped like a classic "stinger" style surfboard and is available in 27 inch and 30 inch lengths. They arrive to you gripped and ready to rip. Made in the USA. Colors may vary.
Temporarily
Sold Out
ROCKIT SKATEBOARDS - by Tracker Trucks
After countless months and many delays, the Rockit Skateboards program has officially launched. These Rockit decks were made at the very same San Diego factory that originally made them 30 years ago. Wheel wells are period correct, decks are flat with single kick and graphics are screen printed on top and bottom. Completes arrive to you assembled and ready to rip.
Completes feature the following components:
• Rockit 7ply 28 x 7.25 inch deck
• Tracker classic MidTracks
• Tracker .25 inch riser pads
• Tracker precision bearings
• 3DM "Cambria" 78 duro wheels
• Custom cut Rockit grip tape
ROCKIT SKATEBOARDS - by Tracker Trucks
After countless months and many delays, the Rockit Skateboards program has officially launched. These Rockit decks were made at the very same San Diego factory that originally made them 30 years ago. Wheel wells are period correct, decks are flat with single kick and graphics are screen printed on top and bottom. Completes arrive to you assembled and ready to rip.
Completes feature the following components:
• Rockit 7ply 28 x 7.25 inch deck
• Tracker classic MidTracks
• Tracker .25 inch riser pads
• Tracker precision bearings
• 3DM "Cambria" 78 duro wheels
• Custom cut Rockit grip tape
Complete
Skateboard:
|
SOLD
OUT - $149.95 | view
cart / checkout |
Deck
Only (with
grip tape applied):
|
SOLD
OUT - $59.95 | view
cart / checkout |
A Tailtap Exclusive! New for 2009 and Available Now!
Tunnel “Comp” Longboard Complete Skateboard - 38" x 9.25"
Each is hand built in our shop with the following high end, made in the USA components:
• Randal R II Trucks
• Tunnel 70mm Tarantula Wheels (you choose your hardness)
• .25 inch risers
• NMB precision bearings
• Hardened 1.25 inch philips head mounting bolts
• Fully assembled and tuned!
In 1976, Tunnel created the Tunnel Competition, a skateboard deck years ahead of its’ time. It featured cutout wheel clearance to avoid wheelbite, camber for increased performance and high quality US construction. It was a perfect competition board for slalom and downhill.
Over 30 years later, we are offering a modern longboard version of this ground-breaking skateboard deck. We took the best of the original Tunnel deck and modernized it to create a new longboard deck that excels in carving, bombing hills and all-around riding. The new Tunnel Comp is 38” long, 9.25” wide, has a 27.25” wheelbase with camber and perfect concave to hold your feet in just right. Graphics on top and bottom feature the iconic Tunnel logo, and the clear grip on top allows the graphics to pop. But most importantly, we updated the materials of this board to make it just right. The new US made Tunnel Comp features composite construction with 7 plys of maple sandwiched between a top and bottom layer of advanced polymer fiber weave. The result – a firm longboard deck with the perfect amount of flex.
Named the Tunnel Comp after both its’ original name and its’ modern, composite construction, it’s a perfect all-around longboard. Please select wheel color/hardness at checkout.
| BUY
NOW - $189.00
| view
cart / checkout
|
Just
In! New Tunnel Complete - Marshall Cobin Model - 7.5" x 26"
We are Stoked to be offering up these new Tunnel hand built completes. The Marshall Cobin is the newest deck offering by Mike and John over at Tunnel and it is a real smoker.
We are assembling these completes with Tracker MidTrack model trucks and the newest Tunnel soft Rock wheels. Our grey Cobin complete is built with the new trans blue 75 durometer Rocks and the Yellow Cobin is set up with the new trans orange 82 duro Rocks. Both are killer - made in the USA completes. Get one today and start surfing the sidewalk tomorrow.
Please specify deck color and wheel color/hardness at checkout.
*Update: Yellow model temporarily sold out. Currently available in red or blue.
We are Stoked to be offering up these new Tunnel hand built completes. The Marshall Cobin is the newest deck offering by Mike and John over at Tunnel and it is a real smoker.
We are assembling these completes with Tracker MidTrack model trucks and the newest Tunnel soft Rock wheels. Our grey Cobin complete is built with the new trans blue 75 durometer Rocks and the Yellow Cobin is set up with the new trans orange 82 duro Rocks. Both are killer - made in the USA completes. Get one today and start surfing the sidewalk tomorrow.
Please specify deck color and wheel color/hardness at checkout.
*Update: Yellow model temporarily sold out. Currently available in red or blue.
|
BUY
NOW - $149.00
| view
cart / checkout
|
Tunnel
Retro 70's Deck
This Tunnel 70's retro complete is a great sidewalk surfer or bowl cruiser. These boards look and ride like the original 70's Tunnel decks and have the stamp of approval from original Tunnel founder Mitch Haake. Pick one up today and start surfing sidewalks and carving concrete! Deck comes with die cut grip tape. Available in red or blue.
Length: 28 inches.
Width: 8 inches.
Wheelbase: 14.75 inches.
Nose/Tail: Single kick
Concave: Very slight.
Other: Wheel wells all the way around, made in San Diego, California.
*Completes come pre-assembled with Tracker MidTracks, Tracker abec 5 precision bearings, Tunnel Rock wheels, .25 inch risers and full grip. Specify wheel hardness at checkout.
|
BUY
NOW - $159.00
| view
cart / checkout
|
Temporarily Sold Out
NEW JAY ADAMS Z FLEX Completes
The newest round of the always popular Jay Adams 29 and 27 inch Z Flex Cruisers. Completes arrive to you fully assembled and ready to rip. Whether it's riding your local park or just cruising down the streets these skateboards are 100% fun all the time.
• Decks: Z Flex Jay Adams 29.25" x 7.5" or 27" x 7.5".
• Wheels: Bennett Alligator 62mm- your choice of hardness.
• Trucks: Bennett 4.375 Vector model.
• Risers: .25 inch.
• Bearings: Abec 7.
• Grip Tape: Custom cut Z Flex with prism underlay.
• Hardware: 1.25 inch philips head with nylon insert lock nuts.
|
27" - SOLD
OUT - $169.00
| view
cart / checkout
|
|
29" - SOLD
OUT - $169.00
| view
cart / checkout
|
Z-Flex Skateboards - Jay Adams 32" Complete
• Deck: Z-Flex Jay Adams 32" x 8.25"
• Available in Two Colors: Purple and yellow stain, while supply last.
• Wheels: Bennett Alligator 62mm - your choice of hardness.
• Trucks: Bennett 4.375 Vector model.
• Risers: .25 inch.
• Bearings: Abec 7.
• Grip Tape: Custom cut Z-Flex with prism underlay.
• Hardware: 1.25 inch philips head with nylon insert lock nuts.
Currently only available in purple
|
32" - SOLD
OUT - $169.00
| view
cart / checkout
|
